MANUAL GAS CUTTING BLOWPIPE
1. ECONOMY
-Head, Socket and Body made from Pressure Casting
-Weight : 1600gms (Aprox)
-Thermocol Packing
-Standard Packing 24pcs
-Blow pipe mixing cutter
-Weight of cutter: 1.600 kg. Lower fatigue to operator due to its light weight
-Oxygen & fuel gas tube: use two pipe extruded brass tube specified material ensure highly resistant and longer life
-Control knob: brass extruded spindle are use in control knob for longer life
-Cutting blow pipe available in different length like 520mm, 750mm and as per customer requirement
| Cutting Capacity: | Type: | Fuel Gas Used: | Length of Cutter: | Weight of Cutter: | Head Angle: | Torch Connection: |
|---|---|---|---|---|---|---|
|
300mm Thickness MS Plate |
Blow Pipe Mixing Cutting |
Acetylene / LPG |
520 mm |
1.600 Kg |
90° |
3/8 BSP RH for Oxygen 3/8 BSP LH Fuel Gas (LPG/ Acetylene) |
2. SEMI - FORGED
-Head and Socket are made from Brass Forged
-Body made from Pressure Casting
-Weight : 1600gms (Aprox)
-Fully Brass
-Standard Packing 24p
-Blow pipe mixing cutter
-Head & Body Joint : forged brass material
-Weight of cutter: 1.600 kg. Lower fatigue to operator due to its light weight
-Oxygen & fuel gas tube: use two pipe extruded brass tube specified material ensure highly resistant and longer life
-Control knob: brass extruded spindle are use in control knob for longer life
-Cutting blow pipe available in different length like 520mm, 750mm and as per customer requirement
| Cutting Capacity: | Type: | Fuel Gas Used: | Length of Cutter: | Weight of Cutter: | Head Angle: | Torch Connection: |
|---|---|---|---|---|---|---|
|
300mm Thickness MS Plate |
Blow Pipe Mixing Cutting |
Acetylene / LPG |
520 mm |
1.600 Kg |
90° |
3/8 BSP RH for Oxygen 3/8 BSP LH Fuel Gas (LPG/ Acetylene) |
3. FULLY FORGED
-Fully Brass Forged Cutter
-Mixing Pipe made from Extrude Pipe
-Working Pressure: 2.5kgf/cm, 4kgf/cm
-Weight : 1600gms (Aprox)
-Standard Packing 24pcs
-Blow pipe mixing cutter
-Body: forged brass material
-Head: forged brass material
-Weight of cutter: 1.600 kg. Lower fatigue to operator due to its light weight
-Oxygen & fuel gas tube: use two pipe extruded brass tube specified material ensure highly resistant and longer life
-Control knob: brass extruded spindle are use in control knob for longer life
-Cutting blow pipe available in different length like 520mm, 750mm and as per customer requirement
| Cutting Capacity: | Type: | Fuel Gas Used: | Length of Cutter: | Weight of Cutter: | Head Angle: | Torch Connection: |
|---|---|---|---|---|---|---|
|
300mm Thickness MS Plate |
Blow Pipe Mixing Cutting |
Acetylene / LPG |
520 mm |
1.600 Kg |
90° |
3/8 BSP RH for Oxygen 3/8 BSP LH Fuel Gas (LPG/ Acetylene) |
4. 3PIPE GAS CUTTER
-Body made from Pressure Casting
-Weight : 1300gms (Aprox)
-Standard Packing 24pcs
-Nozzle Mixing Cutter
-NM Type Three Seat Nozzle: Much Safer, Virtually No chances of Backfire / Flashback Gases Mixed In The Nozzle Only
-Weight of Cutter: 1.300 Kg. Lower Fatigue To Operator Due To Its Light Weight
Head: Forged Brass Specified Material
- Oxygen & Fuel Gas Tube: Use 3 Nos Seamless Stainless Steel Tube, Ensure Highly To Corrosion and Longer Life
-Handle: Aluminium Material Is Used For Longer Life
-Control Knob: Stainless Steel Spindle are use in Control Knob For Longer Life
| Cutting Capacity: | Type: | Fuel Gas Used: | Length of Cutter: | Weight of Cutter: | Head Angle: | Torch Connection: |
|---|---|---|---|---|---|---|
|
300mm Thickness MS Plate |
Nozzle Mixing |
Acetylene / LPG |
500 mm |
1.300 Kg. |
90° |
3/8 BSP RH for Oxygen 3/8 BSP LH Fuel Gas (LPG/ Acetylene) |